steel plate,steel coil,steel bar for sale
Home>>Products>>tg aisi d2 din 1 2379

tg aisi d2 din 1 2379

tg aisi d2 din 1 2379

Our steels have been widely applied to many industries and fields, such as the construction industry, shipbuilding industry, pressure vessels and boilers, oil and gas, bridge construction, offshore platforms, stamping cold forming,etc.

D2 Tool Steel 1.2379 SKD11 Tool Steel - Otai Special Steel

5. AISI/ASTM A681 D2 Grade Steel Forging. Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850°-1950°F and reheat as often as necessary, stopping work when the temperature drops below 1700°F(926°C). After D2 die steel forging, cool slowly in lime, mica, dry ashes or furnace. AISI D2 steel should always be annealed after forging.

Contact Supplier

DIN 1.2379 /AISI D2/JIS SKD11,DIN X155CrVMo121,high …

DIN 1.2379 /AISI D2/JIS SKD11,DIN X155CrVMo121,Bohler K110 Basic information of DIN 1.2379 1.2379 die steel is a kind of high carbon high chromium alloy tool steel.

Contact Supplier

DIN 1.2379 / AISI D2 - Alta Special Steel

1.2379 tool steel, 1.2379 steel bars, 1.2379 flat bars, 1.2379 ESR tool steel, D2 ESR tool steel, D2 steel plates, 1.2379 material data sheet, DIN 1.2379 equivalent ...

Contact Supplier

HCHCR D2 / AISI D2 / DIN 1.2379 Tool Steel Ventura Steels

Ventura Alloy and Steels stocks and supplies HCHCR D2 Steel Cold Work Tool Steel in Round, Square and Flats with test certificate. Equivalent grade is DIN 1.2379.

Contact Supplier

D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11

AISI D2 Steel Forged – Grade ASTM A681; For forging the AISI D2 tool steel should be heat to 700°C (1292°F) slowly and uniformly. Then heating to 900-1040°C (1652-1904°F) rapidly and Soak thoroughly. After finished forging, slowly cool down in furnace. as necessary, stopping work when the temperature drops below 1700°F(926°C).

Contact Supplier

1.2379 Tool Steel AISI D2- Tool Steel Specification and ...

1.2379 AISI D2 is a high carbon, high chromium, molybdenum, vanadium, air hardening tool steel which offershigh surface hardness, good wear resistance, through hardening properties, dimensional stability and high resistance to tempering effect. 1.2379 X155CrVMo12-1 …

Contact Supplier

DIN 2379 Steel Din 1.2379 Tool Steel 1.2379 Steel Supplier

Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of Din 2379 Cold Work Steel in Europe, USA and India. Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of Din 2379 Cold Work Steel in Europe, USA and India. ... AISI D2. AFNOR Z160CDV12. C 1.54 Si 0.32 Mn 0.34 Cr 12.00 Mo 0.76 V 0.91

Contact Supplier

DIN 1.2379 /AISI D2/JIS SKD11,DIN X155CrVMo121,high …

DIN 1.2379 /AISI D2/JIS SKD11,DIN X155CrVMo121,Bohler K110 Basic information of DIN 1.2379 1.2379 die steel is a kind of high carbon high chromium alloy tool steel.

Contact Supplier

DIN 1.2379 / AISI D2 - Alta Special Steel

1.2379 tool steel, 1.2379 steel bars, 1.2379 flat bars, 1.2379 ESR tool steel, D2 ESR tool steel, D2 steel plates, 1.2379 material data sheet, DIN 1.2379 equivalent ...

Contact Supplier

HCHCR D2 / AISI D2 / DIN 1.2379 Tool Steel Ventura Steels

Ventura Alloy and Steels stocks and supplies HCHCR D2 Steel Cold Work Tool Steel in Round, Square and Flats with test certificate. Equivalent grade is DIN 1.2379.

Contact Supplier

Mat.No. 1.2379, DIN X155CrVMo12-1, AISI D2 - Co., Ltd.

Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI OCR12 834 1.2379 X155CrVMo12-1 X160CrMoV121 D2 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 1.53 0.35 0.40 12.00 1.0 - 0.85 - - DescriptionThis alloy is one of the cold work, high carbon, high chromium type tool steels.

Contact Supplier

D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11

AISI D2 Steel Forged – Grade ASTM A681; For forging the AISI D2 tool steel should be heat to 700°C (1292°F) slowly and uniformly. Then heating to 900-1040°C (1652-1904°F) rapidly and Soak thoroughly. After finished forging, slowly cool down in furnace. as necessary, stopping work when the temperature drops below 1700°F(926°C).

Contact Supplier

AISI D2 (DIN-1.2379) (IS-XT160Cr12), Tool Steel (Die Steel ...

AISI D2 (DIN-1.2379) (IS-XT160Cr12) Round Bar Guru Gautam Steel is one of the leading supplier, manufacturer and exporter of AISI D2 (DIN-1.2379) (IS-XT160Cr12) Tool Steel Round Bar in Mumbai India. These AISI D2 tool steel round bar hardens in air with a low order of movement and offers a measure of corrosion resistance when polished.

Contact Supplier

D2 1 2379 Alloy Die Steel Material - computaholics

AISI D2/DIN 1.2379 Introduction D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and is machinable in the annealed condition. D2 steel shows little distortion on correct hardening.

Contact Supplier

EN/DIN 1.2379/ AISI ~ D2/ JIS ~ SKD 11 - RovalmaRovalma

en/din 1.2379/ aisi ~ d2/ jis ~ skd 11 Products > Conventional Tool Steels > Cold work tool steel > EN/DIN 1.2379/ AISI ~ D2/ JIS ~ SKD 11 Ledeburitic cold work steel with high chromium content.

Contact Supplier

1.2379 / X153CrMoV12 Steel - Cold Work Tool Steel Steel …

1.2379 / X153CrMoV12. DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high chromium type cold work tool steel. The Molybdenum and Vanadium compositon of din 1.2379 is more than 1.2601 steel. X153CrMoV12 steel has higher strength and toughness,which makes the comprehensive performance of 1.2379 steel better.

Contact Supplier

D2 Tool Steel (X153CrMoV12) Interlloy Engineering ...

Similar to AISI D2. Applications Cutting, punching, stamping tools, shear blades, thread rolling dies, cold extrusion dies, drawing and bending tools, flanging and straightening rolls, fine cutting tools, deep drawing tools, plastic moulds for abrasive polymers.

Contact Supplier

AISI D2 AISI D2 Tool Steel AISI D2 Cold Work Tool Steel

Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of AISI D2 Cold Work Steel in USA, India and Europe. Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of AISI D2 Cold Work Steel in USA, India and Europe. ... DIN 2379. AFNOR Z160CDV12. C 1.54 Si 0.32 Mn 0.34 Cr 12.00 Mo 0.76 V 0.91

Contact Supplier

Tool Steel Forging 1.2379 Wholesale, Tool Steel Suppliers ...

45mm 38mm hot forged tool Steel round bar D2, 42crmo4, ASTM A681, DIN 1.2379, SAE J437, J438 . US $380-420 / Ton . 1 Ton (Min. Order) ... TG AISI D2/DIN 1.2379/SKD11 Forged Tool & Die Steel Round Bar Annealed peeled surface ... C HRC (HRC) 50 Steel grades according to W.No. DIN EN AISI RUSSIA CHINA BÖHLER 1.2379 X155CrVMo121 X160CrMoV121 ...

Contact Supplier

1.2379 Tool Steel D2, 1.2379 Tool Steel D2 Suppliers and ...

S imilar steel grade & equivalent steel materials USA Japanese Gemany British France heat treatment Chinese ASTM&AISI&SAE JIS EN DIN EN BS EN NF ISO GB AISI D2 SKD11 X153CrMoV12 1.2379 ----- Cr12Mo1v1 we have sold A2 1.2379 86CRMOV7 1.2344 flat bar and forged round bar to germany,singapore,pakistan and so on,u can find some pictures below D2 ...

Contact Supplier

TOOL STEEL - D2 - Global Metals

Germany DIN X153 CrMoV12-1 W.Nr 1.2379 Great Britain BS 4659:BD2 USA AISI D2 Japan JIS G 4404 SKD 11 DESCRIPTION D2 is a high carbon, high chromium alloy tool steel. It is a tool steel with high dimensional stability in heat treatment. A duplex microstructure with coarse complex carbides provide a steel with high wear

Contact Supplier